key pad issues

Home / the12volt's Install Bay / Car Security and Convenience / key pad issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

menara024

Member - Posts: 19

Joined: February 21, 2010

Location: Minnesota, United States

Posted: March 05, 2010 at 11:38 AM / IP Logged

my keypad is not working on my 2000 mercury sable i know i have the right code and it doesnt light up to all the numbers like after the third digit it will light up?? i use it about once a year and now it dont work? any ideas or possible fixes??

Back to Top

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: March 05, 2010 at 11:41 AM / IP Logged

Does it not light up at all, or do only certain numbers not light up? If it doesn't light up at all, then maybe it's a blown fuze?

Back to Top

menara024

Member - Posts: 19

Joined: February 21, 2010

Location: Minnesota, United States

Posted: March 05, 2010 at 11:53 AM / IP Logged

only to certain numbers and it dosnt lock when u push the 7/8 9/0 or whichever it is but they do light up and dome light come on

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 05, 2010 at 5:27 PM / IP Logged

if you remove the door panel then remove the key pad assy you will most likely find corrision in the pad very common in ford / mercury cars

you can replace the pad assy

If i Can't Install it I Don't need it Joe

Back to Top

menara024

Member - Posts: 19

Joined: February 21, 2010

Location: Minnesota, United States

Posted: March 13, 2010 at 4:16 PM / IP Logged

i did not find any corrison anything i can do besides replacing

Back to Top

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 13, 2010 at 8:28 PM / IP Logged

you may be able to take the pad apart and check the connections from the buttons to the board ive never done it ive always replaced the pad assy

If i Can't Install it I Don't need it Joe

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

key pad issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.