compustar programing

Home / the12volt's Install Bay / Car Security and Convenience / compustar programing (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: May 01, 2010 at 4:41 PM / IP Logged

I installed an e-bay purchased (i know..no warranty)compustar 2-way combo unit,It won't go into programing mode and I can't get the 2way remote to program either.The one way works fine,it locks/u-locks..remote starts,etc.When i try to go into programing i never get the one chirp after holdind the #1 and #3 buttons,i do get one p.light flash.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: May 01, 2010 at 6:58 PM / IP Logged

you cant get into the programming menu or you cant program the remotes?

to program remotes, cycle ign 5 times ending with it on, wait for unit to click and then press lock.

To enter options programming, dont bother looking at the parking lights.

press the button on the remotes (sequence shown in manual) and listen for clicks from the unit. Each click is a sucessful sequence.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: May 01, 2010 at 7:46 PM / IP Logged

I can only get the 1way remote to program..i get no responce from the unit when I try to program the 2way remote.I am trying to set menu 2-5.ignition controlled locks.i press buttons 1 & 4 for 2 seconds then I start pressing button IV and when i get to 3 presses the unit flashes the p.lights 3 times.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 02, 2010 at 9:17 AM / IP Logged

What model number to you have on the antenna ? Chances are you have the wrong two way antenna or it's a 1 way antenna. Typical of an eBay purcahse and good luck with getting a replacement antenna and warranty for this. Perfect example of why NOT TO buy off eBay and to spend a little more from an actual authorized dealer.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: May 02, 2010 at 10:22 AM / IP Logged

let's forget about the warranty issue and focus on helping me with the programming portion,i am trying to get to menu 2-option 5.when i press buttons I & Iv for 2 seconds i don't get a chirp like i should if i keep going and press button IV 5 times it starts flashing the p.lights 3 times when i get to the third press of button IV.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 02, 2010 at 10:39 AM / IP Logged

prdjr165 wrote:

Like I said, what model number do you have on the antenna ??? If you don't have the right model number antenna or you have a faulty antenna, then you will have NO chance of ever programming what you want.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: May 02, 2010 at 12:32 PM / IP Logged

model # is 2w-900fm.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 02, 2010 at 1:44 PM / IP Logged

Are there any other numbers on there ? Like an ID# or is it just 2W-900FM in large white print ? the remote control you have should be WHITE or BLUE and should have the " 2W900FMR" markings on it as well

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: May 06, 2010 at 10:35 PM / IP Logged

I should be able to go into programming options with the way remote that works,but it just keeps going back to the default options(3 flashes).

icarus_icarus

Copper - Posts: 229

Joined: November 01, 2005

Location: Ontario, Canada

Posted: May 09, 2010 at 10:01 PM / IP Logged

I found with my 2W900 is was tricky to get it into the options menu at times. Took a few tries a lot of the time.

·Ï¢årµ§·

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.