viper 5902 remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 remote start problem (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 21, 2010 at 9:56 AM / IP Logged

I am finally almost completed with the alarm installation on my 88 honda crx.

Everything appears to operate correctly except the starter kill function. I have cut the starter wire as described and connected the starter output wire to H3/4 (violet wire(car side of starter kill)) and H3/5 (green wire(starter input key side of starter kill)). When I try to start the car with the key, all Honda dash functions work properly, but the starter does not crank. If I disconnect the wires and just hook up the starter wires, the car starts normally. Also when I try to remote start with the hd control, it states "remote start not available"...

Can anyone provide assistance to troubleshoot this problem?

Thanks

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 21, 2010 at 10:07 AM / IP Logged

viper 5902 remote start problem -- posted image.

Here is how I've wired the H3 Harness...

h3/1 - ignition

h3/2 - constant 12v

h3/3 - accessory

h3/4 - starter output (car side of starter kill)

h3/5 - starter input (key side of starter kill)

h3/6 - constant 12v

h3/7 - constant 12v

h3/8 - not used

h3/9 - constant 12v

h3/10 - n/a

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 21, 2010 at 10:13 AM / IP Logged

Some more info..

I've tested all the wires with a circuit tester pen and all wires work, except the violet H3/4. Even when I attempt to start the car with key there is no power coming from that wire. I have checked the H3/5 Green starter input wire and there is power as I try to start the car. Just no power coming from H3/4 to the starter...???... Could it be the brain that is the problem???

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: May 21, 2010 at 11:45 AM / IP Logged

H3/7 should not get 12v it goes to the 2nd access or ignition if applicable to your vehicle. h3/2 powers it and your diagram states you have it to 12v. is the alarmed armed when you try to start the car with the key or disarmed?

Advanced

compay

Member - Posts: 16

Joined: March 27, 2010

Location: Saint Vincent

Posted: May 21, 2010 at 12:08 PM / IP Logged

H3/7 should not have a constant 12volt try connection with the H3/1. H3/9 can also be the input to the starter

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 22, 2010 at 6:00 PM / IP Logged

dasbogie wrote:

The alarm is not armed when I try to start the car with the key.

compay wrote:

H3/7 should not have a constant 12volt try connection with the H3/1. H3/9 can also be the input to the starter

Okay... I have now connected H3/7 with H3/1 and I'm now getting "Invalide Pulse Count" on the remote when I try to remote start... Also I don't see why H3/9 should be connected to the starter input?? Though I did test it out and there is no results...

Overall it's still the same, the Violet (Starter Output) still have no power... ??? Help???

lee0092

Member - Posts: 13

Joined: May 21, 2010

Location: Minnesota, United States

Posted: May 23, 2010 at 6:34 PM / IP Logged

help please!? viper 5902 remote start problem -- posted image.

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 8:44 PM / IP Logged

Can you list the color of the wires you tapped into?

Should be

h3/1 (Pink) - BLACK / YELLOW

h3/2 (RED / white) - constant 12v

h3/3 (orange) - Yellow

h3/4(violet) - BLACK/ White Car Side

h3/5 (green)- Black White Key Side

h3/6 (red)- constant 12v

h3/7 (pink/white) - constant 12v

h3/8 (pink/black)- not used

h3/9 (RED / black)- constant 12v

h3/10 - n/a

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 8:46 PM / IP Logged

I wrote the H3/7 wrong use it as previously stated

tegguy

Copper - Posts: 155

Joined: December 21, 2009

Location: Florida, United States

Posted: May 23, 2010 at 8:50 PM / IP Logged

Also Orange H3/3 is not used

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.