lock, unlock won’t work, 02 accord

Home / the12volt's Install Bay / Car Security and Convenience / lock, unlock won’t work, 02 accord (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

quintb2000

Member - Posts: 5

Joined: May 30, 2010

Location: Louisiana, United States

Posted: May 30, 2010 at 10:41 PM / IP Logged

Hi Guys,

I have searched and searched on the topics for my car but i haven't found one unique to my situation. I have a 2002 Honda Accord SE Sedan and i purchased a Valiant \ IC Dynamics Remote Start with Keyless Entry. Model RS 150. I lost my transmitter for my car so i am desperate to get this one to work. I have installed the system and the remote start even works but i can't get the lock and unlock to work. I found the wiring and have it hooked up perfectly but the lock and unlock won't work. When i press the button the lights flash for lock and for unlock but nothing happens. Can you guys please help?

Thanks

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 31, 2010 at 5:12 AM / IP Logged

What wire of the car did you use for lock? What wire of the car did you use for unlock? Did you use any relays? If your alarm has the relays built in, did you supply the common wire with positive voltage or ground?

quintb2000

Member - Posts: 5

Joined: May 30, 2010

Location: Louisiana, United States

Posted: May 31, 2010 at 11:14 AM / IP Logged

I used the (car) black\blue for lock and the orange for unlock. From the system violet for lock and green or unlock. I didn't use any relays. They said to just splice the wires and to tie it in, in the instructions. How do i supply the common wire with positive voltage or ground?? Sorry im new to this.

catback

Silver - Posts: 703

Joined: August 13, 2002

Location: Canada

Posted: May 31, 2010 at 2:03 PM / IP Logged

quintb2000 wrote:

Hi Guys,

I found the wiring and have it hooked up perfectly but the lock and unlock won't work.

Thanks

I can't help but get a laugh out of that. If they were hooked up perfect then they would work.

Have you tested the functionality of the wires you tapped for lock/unlock?

quintb2000

Member - Posts: 5

Joined: May 30, 2010

Location: Louisiana, United States

Posted: May 31, 2010 at 2:47 PM / IP Logged

yes one shows a ground when door is open and the other shows 12v with door open.

(by hooked up perfectly, i mean no flaws in the connections...thanks)

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 31, 2010 at 4:00 PM / IP Logged

Briefly ground the lock wire you tagged, does it lock the doors? Then briefly ground the unlock wire you tagged, does that unlock the doors?

catback

Silver - Posts: 703

Joined: August 13, 2002

Location: Canada

Posted: May 31, 2010 at 5:46 PM / IP Logged

quintb2000 wrote:

yes one shows a ground when door is open and the other shows 12v with door open.

(by hooked up perfectly, i mean no flaws in the connections...thanks)

When door is open? That would be the check for door trigger. You want the wires that show ground when the lock or unlock button is pressed and stop showing ground when the button is released.

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 31, 2010 at 7:56 PM / IP Logged

The wire colors he listed are consistent with the info at techservices.audiovox.com.

quintb2000

Member - Posts: 5

Joined: May 30, 2010

Location: Louisiana, United States

Posted: May 31, 2010 at 8:26 PM / IP Logged

would i need to have a relay connected for this???

91stt

Silver - Posts: 564

Joined: May 24, 2006

Location: New Jersey, United States

Posted: May 31, 2010 at 9:05 PM / IP Logged

Are you sure you are using the correct wires on the system for lock and unlock?

Can you scan and post the wiring diagram from the install manual?

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.