dei tech tip 1923

Home / the12volt's Install Bay / Car Security and Convenience / dei tech tip 1923 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

cobraguy

Member - Posts: 26

Joined: July 20, 2009

Location: Arizona, United States

Posted: July 17, 2010 at 9:30 AM / IP Logged

Is there anyone who can share this with me (us)? It has to do with utilizing the optional LED and Valet switches with the new Viper 5901 that no longer has the connectors in the module. Any help would be greatly appreciated.

fredddy9

Member - Posts: 40

Joined: October 21, 2009

Location: Alberta, Austria

Posted: July 17, 2010 at 6:06 PM / IP Logged

I'd be interested to know this too. I think i read somewhere that pink+red is for LED and gray+red is for that valet switch (or the opposite) but i can't find that post now! i think even it was on some other forum.

fredddy9

Member - Posts: 40

Joined: October 21, 2009

Location: Alberta, Austria

Posted: July 17, 2010 at 6:13 PM / IP Logged

i thought i'll post viper antenna module internals, just for a reference:

The plug has 6 pins, i assume red is +12 and one must be for Valet switch, and one for that bright blue LED. Actually i'm planning to extend my cable a little bit, i hope it won't affect the range of the antenna.

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: July 17, 2010 at 10:21 PM / IP Logged

Cut the Gray and the Pink.

Gray from Valet to the grey from the plug. Black from the valet to Red on the plug.

Blue from the LED to the pink from the plug. Red from the LED to red on the Plug

Just that simple.

cobraguy

Member - Posts: 26

Joined: July 20, 2009

Location: Arizona, United States

Posted: July 18, 2010 at 8:42 AM / IP Logged

Thank you very much!

cobraguy

Member - Posts: 26

Joined: July 20, 2009

Location: Arizona, United States

Posted: July 18, 2010 at 8:48 AM / IP Logged

One quick question Mark...are you simply tapping into the red wire for a power source for the optional valet and LED? You are NOT cutting that wire, right? Just attaching the black wire from the optional valet button and the red wire from the optional LED to that red wire?

t&t tech

Platinum - Posts: 2,603

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 18, 2010 at 11:30 AM / IP Logged

Mark Mizenko wrote:

Cut the Gray and the Pink.

Just that simple.

commit your way to jehovah and he will act in your behalf. psalms 37:5

cobraguy

Member - Posts: 26

Joined: July 20, 2009

Location: Arizona, United States

Posted: July 19, 2010 at 10:20 AM / IP Logged

t&t tech wrote:

Mark Mizenko wrote:

Cut the Gray and the Pink.

Just that simple.

So...the answer is you just tap them into the red wire?

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: July 19, 2010 at 12:04 PM / IP Logged

yes!

t&t tech

Platinum - Posts: 2,603

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 19, 2010 at 6:29 PM / IP Logged

commit your way to jehovah and he will act in your behalf. psalms 37:5

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.