the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 camry, remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
turtle02909 
Member - Posts: 2
Member spacespace
Joined: December 30, 2010
Location: Rhode Island, United States
Posted: December 30, 2010 at 12:23 AM / IP Logged  
Hello peeps, I am confuse with the 2nd starter relay diagram. Where 87-12 volts
85-Primary starter wire
86-To car starter's ground out(-)when running
30-2nd starter wire
My problems is #86 to car starter's ground out(-)when running.
Which wire to I connect this to? Is this negative ground from the metal of car? or from the remote starter module that has (-)200ma second starter turn on wire?
resquchas 
Copper - Posts: 93
Copper spacespace
Joined: April 15, 2010
Location: Virginia, United States
Posted: December 30, 2010 at 3:28 AM / IP Logged  
that diagram seems wrong. pins 85, and 86 should be low voltage coil field pins. this seems more correct.but it depends on yor application.
85-   12volt
86-   gwr - from alarm( it goes to the alarm/rs wire not the car or it will always be on. this is the switch wire)
what are you installing. you have to be specific.
The RIGHT way is the ONLY way.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 30, 2010 at 4:57 AM / IP Logged  
2nd starter wire 200mA to 85.
Ign 1 to 86
30amp fused to 87
Second starter wire from 30
1N4004 diode across 85 and 86, band towards 86.
How many more times does this have to be answered.
Check the archives please.
turtle02909 
Member - Posts: 2
Member spacespace
Joined: December 30, 2010
Location: Rhode Island, United States
Posted: December 30, 2010 at 2:29 PM / IP Logged  
Where is the tach and rear defrost wires on 07 Camry?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 31, 2010 at 6:03 AM / IP Logged  
Either rear of tach on instrument panel, engine management pin 9 on your OBD data connector or one of the dissimilar wires at the injectors.
Defrost wire, check from rear window going forwards.
This is where your DMM gets used.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer