the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 sante fe


Post ReplyPost New Topic
< Prev Topic Next Topic >
xghost 
Member - Posts: 34
Member spacespace
Joined: February 04, 2007
Location: Canada
Posted: October 11, 2011 at 10:42 PM / IP Logged  
Wondering if anyone could please give me any wiring info on the 2010 sante fe? Also any diagrams or explanations for the door locks would be appreciated! Thanks in advance.
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: October 12, 2011 at 8:04 AM / IP Logged  

Here is a link to DEI for the wiring info :  http://www.readyremote.com/main.asp?make=Hyundai

The door locks are standard Type B (-).    Any aftermarket unit should be able to interface the vehicle properly.

Soldering is fun!
xghost 
Member - Posts: 34
Member spacespace
Joined: February 04, 2007
Location: Canada
Posted: October 12, 2011 at 8:34 AM / IP Logged  
So the 2010 doesnt have any position sensor for the locks? Hm, ok Thanks a bunch.
xghost 
Member - Posts: 34
Member spacespace
Joined: February 04, 2007
Location: Canada
Posted: October 12, 2011 at 8:57 AM / IP Logged  
Anyone have the doc or an explanation for the disarm and arm with door locks? Dont have any documents on this?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: October 12, 2011 at 3:54 PM / IP Logged  
You need to find DEI document 1300....
Mike M2
Tech Manager
CS Dealer Services
buddholly 
Copper - Posts: 244
Copper spacespace
Joined: August 24, 2006
Location: United States
Posted: October 12, 2011 at 4:20 PM / IP Logged  
At the brown plug in the drivers kick there is a pink wire, one pulse will disarm, two pulses will unlock. Try factory alarm disarm to this wire and unlock (programmed to double pulse).
At the same plug there is a BROWN / orange wire, that is single pulse arm/lock. Use it for your lock output.
I know I've done 2-3 of them without using any relays just can't remember how for sure.
xghost 
Member - Posts: 34
Member spacespace
Joined: February 04, 2007
Location: Canada
Posted: October 12, 2011 at 9:53 PM / IP Logged  
I did wire in doc 1300 DEI style. However I did not have a DEI module for that purpose. I wired in with a relay, no go when remote started. Then you can wire in extra relays for that problem. I know there is a way with just a couple of diodes I just dont remember. In the end of it all I wired my disarm to disarm and unlock with a diode, and my unlock to unlock on the car. Lock to lock and arm to arm. It worked with vehicle off. When remote started no go. People use those DEI modules on this reallY?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer