04 grand cherokee driver door priority

I am having a problem. I can not get the driver door priority unlock feature to work. I am using a compustar cm6000 brain with a blade al card.  I have tested the car with the factory key fob and I was able to change the settings in the overhead console from all unlock to priority driver unlock and the feature works perfect with the factory fob.  I  changed the settings in the cm6000 to priorty driver unlock but the compustar unlocks all the doors.  I have tried both settings all unlock, priority driver door unlock in the factrory overhead console as well with the cm 6000 set to all unlockall  and priority unlock.  What I did notice is the cm6000 unlocks the driver door then all the others with one unlock push on the remote.  When the factroy fob unlocks all the doors they all unlock at the exact same time.  I really need this feature. I have installed other manufactures remote starts with different interfaces in grand cherokee's and they worked perfect.  I have checked the blades features and priority unlock is there? Why is this cm6000 doing this?  

Is the CM6000 set to double pulse Unlock, Menu 1-04?  That would cause the symptoms you describe.Soldering is fun!

It is set for default.. I reset the menu default. According to the manual default is double pulse off.

It is set for default.. I reset the menu default. According to the manual default is double pulse off.

I am sorry but I have to bump my thread.  This is getting vey frustrating.  I know 1-04 double pulse is off because I tried turning it on and the door locks unlocked twice.  I have tried shorter and longer  pulse durations. Please, anyone who has any ideas let me know.  Is it a bad blade card or brain?  Why would everything else work perfect?