the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 nissan altima xk09 issues


Post ReplyPost New Topic
< Prev Topic Next Topic >
97f150ext 
Copper - Posts: 104
Copper spacespace
Joined: January 17, 2004
Location: United States
Posted: December 17, 2011 at 4:55 PM / IP Logged  

06 Nissan Altima.  Just re flashed the XK09 to NISS2_1.05.  Hooked it up, LED came on solid, flashed once and went out with ignition.  However, hit the remote start and I get 1 second of crank and the engine will not start.  If during the remote start process, I hold the head of the key to the ignition tumbler, I get full crank and start.  So I know its the programming in the XK09.  I've reset it a couple times and attempted to re-program, but I still have the same results.  Currently the CAN high and low wires are connected at the OBDII connector.  Would it change anything to hook them to the same wires at the BCM?  Not a problem to do, but I didn't have time to check before I had to go to a wedding this afternoon.  I have another XK09 I can flash and attempt to program if needed.  Any tips would be greatly appreciated.  Thanks.

shortcircuit161 
Silver - Posts: 556
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 29, 2010
Location: United States
Posted: January 14, 2012 at 9:47 PM / IP Logged  
As long as you connected to the Blue (CAN High) and Pink (CAN Low) wires in the right order at the OBD connector, you shouldn't have to go to the BCM.
I would try resetting the module and then reprogram it again.
Make sure your connections for the CAN wires are soldered on.
Since you have another module, if your reprogramming doesn't work, I would change it out. Good Luck!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer