compustar cm6000, 2005 trailblazer

Home / the12volt's Install Bay / Car Security and Convenience / compustar cm6000, 2005 trailblazer (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

naviracer23

Member - Posts: 11

Joined: December 29, 2011

Location: Wisconsin, United States

Posted: December 29, 2011 at 4:10 PM / IP Logged

So tomorrow I'll be doing my 3rd remote starter in a 2005 Trailblazer and had just a few questions. I'll be using the AL-CA with the vehicle so I'll be running in data mode.

1) This vehicle needs the 2nd accessory at the ignition harness to be powered up, so do I use the 2nd accessory output from the white 20-pin harness to do that? If so, should I use a relay?

2) Do I need to use a relay for horn or parking light output?

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: December 29, 2011 at 5:13 PM / IP Logged

The vehicle needs the second ignition powered

Yes u need a relay

Positive parking lights

Negative horn

naviracer23

Member - Posts: 11

Joined: December 29, 2011

Location: Wisconsin, United States

Posted: December 29, 2011 at 5:20 PM / IP Logged

Do I also need a seperate relay for parking lights and horn?

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: December 29, 2011 at 5:31 PM / IP Logged

You should have positive parking lights on that unit --GREEN / WHITE

And the horn should be a negatitive. --White

naviracer23

Member - Posts: 11

Joined: December 29, 2011

Location: Wisconsin, United States

Posted: January 14, 2012 at 6:44 PM / IP Logged

Can someone familiar with compustar remote starters call me asap at 715-571-5242 thanks!

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: January 14, 2012 at 9:07 PM / IP Logged

I can't call you but you are welcome to post any issues on here and we can try to help.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 14, 2012 at 9:24 PM / IP Logged

We have compustar dealers here using the board, such as Metz and myself, if you got compustar questions post it here (as Kenny suggested) , and I'm sure we can direct your questions

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: January 14, 2012 at 9:26 PM / IP Logged

I have recently started using Compustars as well.. and have gotten pretty accustomed to them... so I'm sure any of us can help you once you post up your issues.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 14, 2012 at 9:26 PM / IP Logged

To your question on the white 20pin harness take the second negative ignition output (-) connect to a relay which is given

85 negative ignition

86 constant 12v fused

87 constant 12v

30 second ignition wire on vehicle

87a unused

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: January 15, 2012 at 6:28 AM / IP Logged

Parking lights positive straight connection from remote start with the large GREEN / WHITE to brown in the car no relay

Horn Negative straight connection from remote start small white to black in the car no relay

Also hardwire the tach as that car has issues with a data tach. Yellow/ black from

Remote to white in the car. If you dO not hardwire tach eventually you will start to get get error code 1-3 which is an already running code/no tach programmed code

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.