the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

spal 37000118 door lock switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 07, 2012 at 3:33 PM / IP Logged  
hi all,
does anyone have a wiring diagram for the spal 37000118?
I'm adding this switch to aftermarket actuators.
additional info:
Truck-99 Tacoma
Alarm-Python 533
I'm using a relay pack DEI 451m.
Thanks in advance.
spal 37000118 door lock switch -- posted image.
sgarcia1212
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 07, 2012 at 3:39 PM / IP Logged  
Edit for my previous post:
here is the link for the switch that I want to install.
http://www.spalusa.com/store/main.aspx?p=itemdetail&item=37000118
thanks.
sgarcia1212
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 07, 2012 at 5:29 PM / IP Logged  
Here's an experience based test.
Go to the reference data and look at the reverse view.
Top right is illumination
Middle three are obvious, 2 x grounds and 12V+.
Bottom two will be your motor wires.
To find out, with a meter set to continuity buzzer or low ohms, and the switch at rest both of the lower two should be continuous with the pins marked ground.
Move the switch one way and one stays continuous with ground the other becomes continuous with the +.
Move in the other direction and those connections are reversed.
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 08, 2012 at 9:47 AM / IP Logged  
Thanks howie ll.
I've learned so much from all your replays to different people.
Thanks for sharing you knowledge.
sgarcia1212
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 08, 2012 at 11:48 AM / IP Logged  
one more question howie ll,
is necessary to add installing an after marker door lock switch?
spal 37000118 door lock switch -- posted image.
Thanks in advance.
sgarcia1212
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 08, 2012 at 11:52 AM / IP Logged  
Edit my above post:
question was, if is necessary to add Diodes when adding a door lock switch.
sgarcia1212
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 08, 2012 at 8:33 PM / IP Logged  
No it won't work you need a 5 wire actuator and a dedicated timer relay from Spal, Mes etc. And all the wiring will be different.
sgarcia1212 
Member - Posts: 40
Member spacespace
Joined: October 08, 2010
Location: California, United States
Posted: May 08, 2012 at 8:45 PM / IP Logged  
Ok.
Thanks.
sgarcia1212

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer