desperate to identify alarm module

I think it may actually be a VSS2200 based on some pictures I found...If this unit is compatable with an 03 vette then I think I am there..Now to find the prg sheet somewhere..............

1. Open a door: < size=2 face=Arial>< size=2 face=Arial>The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.

2. Turn the ignition on, then off: < size=2 face=Arial>< size=2 face=Arial>The YELLOW wire, H1/9 must be connected.

4. Select a feature: < size=2 face=Arial>< size=2 face=Arial>Press and release the valet/program button the number of times corresponding

to the step you wish to change. For example, to access the third feature, press

and release three times. Then press the button once more and HOLD it. The siren will

chirp the number of times equal to the step you have accessed.

5. Program the feature: < size=2 face=Arial>< size=2 face=Arial>While holding the valet/program button, you can toggle the feature

on and off using your factory remote transmitter. Pressing the button that locks the doors

will select the one chirp or default setting. Pressing the button that unlocks the doors, will

select the two chirp setting.

NOTE: < size=2 face=Arial>< size=2 face=Arial>The valet pulse count feature (8) has five possible settings. Pressing unlock will

toggle through all the possible settings.

If this works I will owe you big time!  I will try this first thing tomorrow.

Thanks for the research!