simple yet little known smartstart issue

Home / the12volt's Install Bay / Car Security and Convenience / simple yet little known smartstart issue (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

petef

Member - Posts: 21

Joined: September 15, 2012

Posted: September 19, 2012 at 6:49 PM / IP Logged

I have been doing a little research on my planned installation of a smart start module. I have a 2006 grand cherokee. It seems that using a xpresskit DBALL with the T-harness, an avital 4103, and a smartstart module is impossible without connecting wire to wire because there are not enough D2D ports. Is this true? Is there any remote starter with 2 D2D ports that are able to be used with a smartstart module and just plug into the DBALL?

Back to Top

petef

Member - Posts: 21

Joined: September 15, 2012

Posted: September 19, 2012 at 7:45 PM / IP Logged

Can i connect the smartstart to the 4103 with the bitwriter port, and the 4103 to the dball with the d2d port, and the dball to the Chthd2 harness?

It seems like if you connect the smartstart to the dball, then your car needs a factory remote starter, is this true?

Back to Top

pissdrunkone

Member - Posts: 9

Joined: October 20, 2004

Location: United States

Posted: September 27, 2012 at 3:21 AM / IP Logged

All you need is smart start and dBall flashed with RSR firmware. Press lock 3x on fact remote for remote start, or add smart start or rf antenna kit

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

simple yet little known smartstart issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.