the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

astroflex 4204 remote programming


Post ReplyPost New Topic
< Prev Topic Next Topic >
schof08 
Member - Posts: 4
Member spacespace
Joined: October 05, 2012
Location: North Dakota, United States
Posted: October 05, 2012 at 5:00 PM / IP Logged  
I bought a my pickup (2005 silverado 1500)awhile ago and I found out that it had a astroflex 4204u auto starter installed, but the autodealer did not have the remote for it. I recently but a replacement remote and tried programming it and seemed to get it all working except for when I to remote start it. The pickup will turn over and try to start, but wont start. It does have a bypass unit on top of the 4204u unit. it is a gmdl-bp so I dont know if that has anything to do with it. Any kinda help would would be great. I do have a dealer near by that works with astrostart, just wanted to see if I could do it myself before paying for it to be done. Thanks
auto enhancers 
Copper - Posts: 203
Copper spacespace
Joined: April 09, 2012
Location: Indiana, United States
Posted: October 07, 2012 at 11:34 AM / IP Logged  
Is the toggle switch on. What does it do when you try and remote start it. After it fails the led will flash on the brain a number of times(1-9) it will repeat that sequence so count how many and get back to us.
schof08 
Member - Posts: 4
Member spacespace
Joined: October 05, 2012
Location: North Dakota, United States
Posted: October 08, 2012 at 12:34 PM / IP Logged  
the toggle switch is on. When I prethe remote start button it cranks for about 2 or 3 seconds then stops. nevver starts. It seems to blink 12 times and wont stop blinking.
schof08 
Member - Posts: 4
Member spacespace
Joined: October 05, 2012
Location: North Dakota, United States
Posted: October 09, 2012 at 8:07 AM / IP Logged  
sorry about last reply. The 4204 brain was blinking 12 times, not the bypass .The bypass was blinking 6 times, but I got that programmed for my model of vehicle already. It still is not working though, The unlock and lock feature works fine, just not the autostart.
schof08 
Member - Posts: 4
Member spacespace
Joined: October 05, 2012
Location: North Dakota, United States
Posted: October 09, 2012 at 9:47 PM / IP Logged  
Problem solved! had to change the tach settings for an 8 cyl. vehicle

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer