the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clifford matrix with 507m tilt sensor


Post ReplyPost New Topic
< Prev Topic Next Topic >
tonynca 
Member - Posts: 5
Member spacespace
Joined: January 15, 2013
Posted: January 15, 2013 at 2:23 AM / IP Logged  
So I hooked up the tilt sensor to all the wires that the instruction manual indicated since the harness did not work with my 4-pin sensor input on my alarm.
Ground when armed to orange wire
Instant trigger to blue wire
12v constant to the red wire
I didn't use any diodes, I'm not sure if I should or not. Seems to work fine for now. One problem I'm having is that since my ground when armed wire is for the trunk pin, I get a trunk tamper indicator when the tilt sensor is triggered. Does anyone know how to get the 507M sensor to trigger the tilt sensor indicator on the LCD remote?
I heard that I may have to buy the Bitwriter to program the sensor to my alarm. Could someone confirm?
tonynca 
Member - Posts: 5
Member spacespace
Joined: January 15, 2013
Posted: February 02, 2013 at 1:32 AM / IP Logged  
FYI for people with the same issue as me. I found a solution with the help of some folks on my.is: http://my.is/forums/f103/directed-507m-tilt-sensor-clifford-matrix-12-5x-448318/
The sensor now worked perfectly after using a Bitwriter to program Zone 4 and swapping the red and blue wire so it correctly matches the pin-out on the alarm's sensor port.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer