2007 nissam maxima

Home / the12volt's Install Bay / Car Security and Convenience / 2007 nissam maxima (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ricardoboston

Copper - Posts: 268

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: November 13, 2013 at 6:42 PM / IP Logged

hello everyone needs please some help on this car ,i will install a avital 5303 with ads al ca bypass the problem is do i have to get the immobilizer data and immobilizer clock wired?or just the can h and can l ,any tips i really appreciate thanks

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: November 13, 2013 at 9:12 PM / IP Logged

You need to make all the connections as listed in the install guide for the ADS-AL-CA. No exceptions. It shows all need connected unless your vehicle does not have an immobilizer ring around the ignition. Which I have never seen an 07 Maxima without one.

Back to Top

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: November 14, 2013 at 5:32 AM / IP Logged

my question was just because i haven't used theses wires before ,can you tell me what this wires are used for ?cause the can h and can l is the ones the take care the immobilizer and any especial tip on this car or is a easy car to do remote start thanks

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: November 14, 2013 at 8:40 AM / IP Logged

The immobilizer data and clock wires take care of the transponder bypass. The CANH and CANL wires do everything else likes locks, trunk, door triggers, etc.. Its a pretty easy install as long as you follow the AL-CA diagram. Even if you don't understand it 100% they tell you to make the connections because you need them.

Back to Top

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: November 14, 2013 at 8:30 PM / IP Logged

i was thinking about a dlpk module ,looks pretty easy installation ,also i use it before the only thing its i will need to wire a relay for take over anyways even with ads al ca or what do you think?

Back to Top

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: November 16, 2013 at 6:54 PM / IP Logged

works perfect with dlpk i try for first ads al ca but it won't work everything else door locks,trunk, works just fine but not start ,i replace the module and it works DLPK FIX my day

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 nissam maxima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.