viper 4105 in hyundai santa fe

Home / the12volt's Install Bay / Car Security and Convenience / viper 4105 in hyundai santa fe (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

revrider76

Member - Posts: 1

Joined: December 02, 2013

Location: Illinois, United States

Posted: December 02, 2013 at 9:53 AM / IP Logged

Installing a viper 4105 in my 2008 santa fe and am having a problem with arming and disarming the factory alarm. I printed off a wiring diagram from here and it says the alarm wire is BROWN / orange in dkp which I found. The disarm wire is a grey wire and pink wire (double pulse). So my question is how do I hook up the single wire from remote start unit to the 2 wires in the car? Ive been out of the car electronics area for a looooong time so I'm a little rusty.

Thanks for the help!

Back to Top

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: December 02, 2013 at 11:13 AM / IP Logged

One way would be to split your disarm output with 2 diodes bands facing the viper.

Advanced

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 4105 in hyundai santa fe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.