the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 ford edge remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
dcesa1 
Member - Posts: 7
Member spacespace
Joined: January 04, 2014
Location: Minnesota, United States
Posted: January 05, 2014 at 5:28 PM / IP Logged  

Im installing the Avital 4113LX remote start and I was wondering where I can connect to the Neutral safety switch or if I need it at all. I tried running the start without connecting it and it didnt work so im hoping this is my problem. Any help is appreciated.

kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 05, 2014 at 6:04 PM / IP Logged  
If the Edge has an automatic transmission ( I think they all do ) you can connect it to the (-) EBrake wire or Chassis Ground if you don't want to set the EBrake every time you park the vehicle.
Soldering is fun!
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: January 07, 2014 at 11:45 AM / IP Logged  
neutral safety switch wire to ground.
freqsounds 
Copper - Posts: 289
Copper spacespace
Joined: October 17, 2008
Location: Virginia, United States
Posted: January 11, 2014 at 5:31 PM / IP Logged  
kreg357 wrote:
If the Edge has an automatic transmission ( I think they all do ) you can connect it to the (-) EBrake wire or Chassis Ground if you don't want to set the EBrake every time you park the vehicle.
I agree, I usually hook this up to the chassis if it's an automatic.
After doing this, take it to a parking lot and try to remote start it with the car off (key in the OFF position) while in reverse or drive. The car shouldn't start. If it does, this wire needs to be hooked up to the neutral safety wire in the car.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer