2008 ford edge ignition bypass

Home / the12volt's Install Bay / Car Security and Convenience / 2008 ford edge ignition bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dcesa1

Member - Posts: 7

Joined: January 04, 2014

Location: Minnesota, United States

Posted: January 18, 2014 at 11:46 AM / IP Logged

Im installing the bypass module and was wondering which wires need to be connected. I have the Avital 4113 with the xpresskit pkfm. Can I connect the 2 just using the D2D connector or do I need to do the other wires also? The D2D connector connects the RX, TX, ignition, and ground.

Back to Top

dcesa1

Member - Posts: 7

Joined: January 04, 2014

Location: Minnesota, United States

Posted: January 19, 2014 at 8:46 AM / IP Logged

bump

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 19, 2014 at 10:30 AM / IP Logged

Go W2W on this. It is only 6 wires.

Per the PKFM Instructions:

Brown----- Blue status output 4113

Green-----TX Pin 2 at PATS connector

Pink---RX Pin 1 at PATS connector

Orange---Ignition at PATS Connector Pin 4

Red---12 volt constant

Black--- Ground

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

dcesa1

Member - Posts: 7

Joined: January 04, 2014

Location: Minnesota, United States

Posted: January 19, 2014 at 10:37 AM / IP Logged

what is the D2D connection for? it seems like it would be an easier way to connect all of the same wires.

Back to Top

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 19, 2014 at 10:59 AM / IP Logged

The way I read the PKFM instructions , TX, RX,ignition,GWR,are not supported in D2D

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 ford edge ignition bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.