2013 ford edge avital 4003

Home / the12volt's Install Bay / Car Security and Convenience / 2013 ford edge avital 4003 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: January 18, 2014 at 3:08 PM / IP Logged

I just installed an Avital 4003 w/DBALL2 on a 2013 Ford Edge. Its been awhile since I have installed a DEI remote starter. Im not sure what to hook up the WHITE/ blue (activation wire). Correct me if im wrong. Do I connect the WHITE/ blue wire to the lock wire? The wire that pulses when you press the lock button on the OEM remote? If so, what wire is it on the 2013 Ford Edge? I cant find it for the life of me.

Thanks for your help.

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: January 18, 2014 at 6:48 PM / IP Logged

Why not just program dball for rsr

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: January 20, 2014 at 6:11 PM / IP Logged

I dont really understand what you mean. Will I be able to start the car by pressing the lock button 3 times?

Can anyone else chime in?

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 20, 2014 at 7:37 PM / IP Logged

You would need a XL202 or a smart start module to go with it to make it RSR (Remote Start Ready).

http://www.xpresskit.com/VehicleCompatibility.aspx?p=null&year=2013&make=Ford&model=Edge%20%28SA%20Key%29&ps=1&s=0&c=0

Look at the RSR Install guide tab on the DB-ALL part.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: January 20, 2014 at 8:06 PM / IP Logged

A dball programmed for rsr doesn't need any extra parts, just 3x lock button and it starts. No xl202 or smartstart is needed

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 20, 2014 at 8:21 PM / IP Logged

You are correct. I stand corrected.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: January 20, 2014 at 11:25 PM / IP Logged

Thats why I was a little confused. I was looking at the RSR diagram and it said it needs an extra part. Good to know that it doesnt!

My next question is will I need to hook up all the connections for it to work? The only thing that I didn't hook up is the door pin and lock and unlock activation inputs according to the Xpresskit diagram. Any idea if I need to?

daflipcyde

Copper - Posts: 68

Joined: October 28, 2006

Location: Manitoba, Canada

Posted: January 21, 2014 at 9:28 AM / IP Logged

I believe if you don't hook up those wires factory alarm will go off while trying to start.

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: January 25, 2014 at 5:30 PM / IP Logged

Ok I reprogrammed the DBALL2 for RSR and connected the rest of the wires needed for it. It works now! Thanks for the help.

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: January 31, 2014 at 5:24 PM / IP Logged

FYI you do not need to hook up door pin and lock and unlock wires

The lock and unlock wires are for if your are using smartstart or something like that so you can lock and unlock from the phone

Also the door pin wire is just so if you remote start and then shut it off from remote it simulates a door opening to turn the radio off, otherwise it stays on for 15 min or whatever

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.