the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 4115v won't turn on?


Post ReplyPost New Topic
< Prev Topic Next Topic >
jsigna 
Copper - Posts: 151
Copper spacespace
Joined: July 25, 2014
Posted: September 30, 2014 at 11:29 PM / IP Logged  
Hey Guys, so I did 2 remote starts so far bare with me.. (My 2013 STI, and 2001 Dodge Dakota).
This is a 2002 Jeep Wrangler. No door locks, no chip in the key.
Should be simple right? Not for my dumb ass.
So I wire the ignition harness and then I got to wire the Primary harness.. and where I am use to seeing a 12v + and a Ground wire I have to connect is not there.
I see a ground input but nothing to power the unit. So I said okay I guess it is running off of the ignition harness.
I grounded the Ground input wire and figured I was good to go.
Nope.. I have no idea why I cannot get the Red LED to light up for anything.
Any ideas why? I am desperate here.
viper 4115v won't turn on? -- posted image.
jsigna 
Copper - Posts: 151
Copper spacespace
Joined: July 25, 2014
Posted: October 01, 2014 at 9:32 AM / IP Logged  
Howie/Catback.. I know one of you guys have some tips for me :)??
cvsct698 
Member - Posts: 45
Member spacespace
Joined: July 19, 2006
Posted: October 01, 2014 at 9:53 AM / IP Logged  
You should be getting power from your ignition harness. Check your connections and fuses. Also, check your grounding location, make sure it is solid and actually a chassis ground. Verify that you have power all the way through the ignition harness, starting at the connection to the car, then on both sides of the fuse holders, and finally at the connector itself. If all is good there, try unplugging all harnesses from the brain, the reconnect them, connecting the ignition harness last. If all that fails, it could be a bad unit.
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: October 01, 2014 at 11:09 AM / IP Logged  
In what way are you trying to get the LED to light up? If the system is fully installed and the remotes are preprogrammed you should have door lock output upon command whenever the ignition is off.
With that and previous recommendation, make sure both your red ignition leads are receiving power.
jsigna 
Copper - Posts: 151
Copper spacespace
Joined: July 25, 2014
Posted: October 01, 2014 at 1:37 PM / IP Logged  
Unit is just a remote start so no door locks.
The led is on the unit itself. There is no LED indicator on the antenna for this unit.
The directions say you can hold down the valet and program stuff and you will see the LED.. I see nothing.
When I hit the remote start button on the remote I hear no relays.
A buddy gave me a replacement brain from an Avital. It looks the same and he said it should work. So if worse comes to worse I will try the other brain.
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: October 01, 2014 at 3:43 PM / IP Logged  
Where is the BLACK/ white wire for neutral safety connected?
pentavolvo 
Copper - Posts: 241
Copper spacespace
Joined: September 30, 2003
Location: United States
Posted: October 01, 2014 at 5:02 PM / IP Logged  
ziggyb222 wrote:
Where is the BLACK/ white wire for neutral safety connected?
X2, also make sure there is 12 volts on brake wire only when pedal is down
jsigna 
Copper - Posts: 151
Copper spacespace
Joined: July 25, 2014
Posted: October 01, 2014 at 5:06 PM / IP Logged  
Black white i have running to the toggle switch and then to a ground.
I didn't even connect the brake wire yet.
I wanted to see it light up and start first.
Is that an issue?
jsigna 
Copper - Posts: 151
Copper spacespace
Joined: July 25, 2014
Posted: October 01, 2014 at 8:06 PM / IP Logged  
Defective toggle switch.. Kill me lol

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer