viper 5906v and dball2, 2014 Ram 1500

hello

i just receive my viper 5906v with the module 516L and 508 d and the dball2 whith the T- harness THCHD3 and  the XKLOADER2 to install in my 2014 Dodge/Ram 1500 (Smart Key) but the thing is i'm living in belgium and there is no dealer or installer for the configuring the key2go of the dball2 my question is do i need to or will it work in range extander ready sorry for my english

You need to go to Xpresskit, down load the software (use W/Explorer it won't work on Chrome). You then program it to the vehicle then back to the computer to program key sense. I see one problem here, I believe only known dealers/installers can access the key to go part. The security part won't work without the DB-ALL being flashed (you can do that as I showed above). The RS definitely won't work without "key to go". Read the instructions from Xpresskit.

thank for you're fast response I download the software and flash it but I'm stuck with the key2go part as you say I don't know what to do

Your problem is that 1) It's an import, not sold in Europe so official dealers won't touch it. 2) There's no one between England and Romania who does R/Start installs. I can install it but you'd have to come to the UK!

if I don't find any solution I will come to the UK best regard

ok.

just wondering what other solution I have without having the key2go programing access problems

With the smart key you haven't.

thank you for you're help

before installing my viper i should finish the programing key2o before