needed Compustar CS700-AS & Fortin EVO-ALL

Home / the12volt's Install Bay / Car Security and Convenience / needed Compustar CS700-AS & Fortin EVO-ALL

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lucianm1971

Member - Posts: 3

Joined: June 10, 2015

Location: Romania

Posted: June 10, 2015 at 10:18 AM / IP Logged

Glad to know you guys! New on this forum and with a big problem. Bought a Fortin EVO-ALL and a Compustar CS700-AS for my 2010 Toyota Prius and cannot get them to communicate by D2D port. First installed EVO-ALL and everything is perfect. I can also remote start the car as it's one of the features provided by this. Anyway reprogramed EVO-ALL and used the schematics from Fortin site to connect the Compustar to it. Problem is that it does not work. Compustar & Fortin do not communicate. All wires in place but nothing. Tried all 3 modes on Fortin port - Fortin, APO and lastly D2D... nothing. What am I doing wrong?

Thank you all for your time reading this. Any help will be greatly appreciated.

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: June 10, 2015 at 7:53 PM / IP Logged

cs700as does not support fortin through d2d, however you can set the fortin for idatalink and use the d2d. perform a reset of the evo-all, turn the idatalink option on, power cycle the cs700 and program the bypass.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

lucianm1971

Member - Posts: 3

Joined: June 10, 2015

Location: Romania

Posted: June 11, 2015 at 1:40 AM / IP Logged

Thank you for you reply Ted, but as I said in the beginning I'm new to this, actually is my first attempt to mount this on a car by myself. Right now EVO-ALL is on AP Datlink/OFA Datalink as you can see in the attached picture. Wires are set like in Fortin schematics (attached). Only solid black on schematics wired. When I power the Compustar, EVO is not receving power through D2D... Do I have to wire all cables? Also the ones with dotted lines in schematics? Is an alarm/remote started that will successfully only the D2D port from Fortin and 2 - 3 wires to get the job done?

Best regards.

needed Compustar CS700-AS & Fortin EVO-ALL -- posted image.

Back to Top

lucianm1971

Member - Posts: 3

Joined: June 10, 2015

Location: Romania

Posted: June 17, 2015 at 8:32 AM / IP Logged

somebody?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.