Dlpkgm and VSM250 compatibility

Home / the12volt's Install Bay / Car Security and Convenience / Dlpkgm and VSM250 compatibility

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kawijess

Member - Posts: 20

Joined: February 11, 2010

Location: California, United States

Posted: September 23, 2015 at 9:40 AM / IP Logged

Hi, is the VSM250 and the Dlpkgm compatible? I had the VSM200 before which worked perfectly and upgraded to 250, but am not able to get a solid green light, and can't program the Dlpkgm. I have the 5901.

Per the instructions, it says to ground the grey wire if using D2D. Can the grey be grounded to the black wire that is used to power the vsm250?

When I first connect everything I get a a solid Amber and green light. When I try and program the Dlpkgm, the green light turns off on the 250 and I'm unable to program the Dlpkgm. The remote start nor the door locks work. If I don't plug in the 250, I'm able to program the Dlpkgm and the RS and door locks work.

I hope this is clear. Thanks for your time!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.