2015 Toyota RAV4 PTS, smart key

Home / the12volt's Install Bay / Car Security and Convenience / 2015 Toyota RAV4 PTS, smart key

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

beachsled

Member - Posts: 1

Joined: November 19, 2015

Location: Alberta, Canada

Posted: November 19, 2015 at 12:02 PM / IP Logged

We have a 2015 Toyota RAV4 with push to start and smart keys. We had a compustar Cm7200 module with idatalink al-ca and a 2 way remote.

This is the issues we are having and not sure if this is correct or not.

* start then stop engine with 2-way remote -> 2-Way Remote shows car unlocked even though it is not.

- Smart unlock door handle makes 2-way remote beep/alarm (change status), but does not do this when smart lock door handle locking is used

- No communication between factory system and compustar factory fob does not change status on 2-way remote

- Factory panic does not work on 2-way remote

Thanks for any feedback you can provide.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.