Horn output

Home / the12volt's Install Bay / Car Security and Convenience / Horn output

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

robgt22

Member - Posts: 2

Joined: December 06, 2015

Location: Guatemela

Posted: December 06, 2015 at 9:13 PM / IP Logged

Good night everybody, so I installed an aftermarket keyless entry, but it doesn't have any output, no horn, lights, anything. I wanted to wire the lights so I'll know when the system locks and unlocks, any idea on how to convert the changing polarity from the actuators to a constant +12v?

Rob

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: December 07, 2015 at 11:28 AM / IP Logged

We are going to need more information. what kind of vehicle, what kind of system is installed, what is hooked up?

Are you needing to change the output of the system from a negative to positive output? if so you can do a search on here for relays and it will show you how to wire in a relay to do that.

Back to Top

robgt22

Member - Posts: 2

Joined: December 06, 2015

Location: Guatemela

Posted: December 07, 2015 at 10:41 PM / IP Logged

Vehicle is a 95 Honda passport. The keyless entry system is aftermarket but its cheap. The controller itself doesn't have an output for horn or lights, the only way I could do it is from the actuator lines, that are two wires that constantly change polarity to make the actuators work. Is it a way to get an output from that line?

Rob

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.