2011 Sierra/Evo All and That-GM4

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Sierra/Evo All and That-GM4

Welcome Guest :)

Members

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: December 19, 2015 at 10:05 AM / IP Logged

Doing a stand alone with the Evo All and the Thar-gm4 t-harness... Plugged the t-harness in... had already updated the module and selected the 3x lock.. held the program button..plugged in the four pin..selected the blue..plugged in the rest of the connectors.. solid blue...ignition on...flashing blue..program button once..the yellow /red alternating..ignition off...DCryptor completed successfully... connect all the connectors...4 pin last... no start..not even any dash lights... Any Ideas???? Thanks!!!

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: December 20, 2015 at 9:02 PM / IP Logged

FYI.... OEM remote monitoring needs to be turned on in the options menu!!!!! DUHHHHH ME!!!!!

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: December 22, 2015 at 1:21 PM / IP Logged

Everything on the EVO-ALL 3x lock starter works as it should. Only thing is are the park lights. Outside in the day the parking lights do not come on while in remote start. The lights are set to auto...and inside all lights come on because it is dark enough. Connected the BROWN / White from the EVO to the Light blue at the switch... Any ideas to make the parking lights come on outside????

ak609

Member - Posts: 47

Joined: December 04, 2014

Location: Alaska, United States

Posted: December 22, 2015 at 4:10 PM / IP Logged

i would test the brown white wire to make sure the evo piece is doing the right thing along with test the light blue wire at the switch to make sure its the right one.

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: December 22, 2015 at 5:17 PM / IP Logged

I will have the truck again tomorrow to double check that... and go into the options on the EVO and check them. I thought maybe the auto lights had something to do with it... Thanks

ak609

Member - Posts: 47

Joined: December 04, 2014

Location: Alaska, United States

Posted: December 22, 2015 at 9:17 PM / IP Logged

looking further into it looks like it is a relay inside there were the yellow black wire is the input while the brown white is the output. so make sure the yellow black is connected to ground

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: December 22, 2015 at 9:39 PM / IP Logged

AAAHHHHH... I did not even pick up on that... It has been awhile since I used the Fortin stuff... Thanks for your help...Merry Christmas!!!

ak609

Member - Posts: 47

Joined: December 04, 2014

Location: Alaska, United States

Posted: December 25, 2015 at 5:35 PM / IP Logged

merry christmas to you to sir!!! hope it all worked out.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.