2007 Tacoma Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Tacoma Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jeremysj

Member - Posts: 2

Joined: December 20, 2015

Location: Tennessee, United States

Posted: December 23, 2015 at 12:44 PM / IP Logged

Hello i bought a remote start off Ebay which said detailed instructions came with it (boy was i wrong). I have been researching on this site for two weeks and now im wondering if i bought the wrong thing. from my research seems like no one has installed this, anyways this is what i bought Excalibur model Rs-160-EDP+ with a omega imo5 pkt2 flashed for my truck. I bought this system just for remote start and to be able to use my factory key fobs.

Back to Top

jeremysj

Member - Posts: 2

Joined: December 20, 2015

Location: Tennessee, United States

Posted: December 23, 2015 at 12:47 PM / IP Logged

All help would be greatly appreciated

Back to Top

dairyboy3

Copper - Posts: 52

Joined: March 26, 2015

Location: California, United States

Posted: December 23, 2015 at 3:41 PM / IP Logged

There is no remote start add on option for the factory fobs for a tacoma. The fobs don't work when the truck is running. Your better off adding a remote start with keyless.

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: December 28, 2015 at 9:49 AM / IP Logged

dairyboy3 wrote:

There is no remote start add on option for the factory fobs for a tacoma. The fobs don't work when the truck is running. Your better off adding a remote start with keyless.

^^^ This is not entirely accurate. There are add-on options available to work with your factory system.

http://www.crimestopper.com/products/security/security-systems/remote-start/rs00-g5

This system will work with your factory fobs. That is what it is designed for. If you find the you need more range you can add the 2-way Upgrade kit.

Back to Top

arceecola

Member - Posts: 1

Joined: February 13, 2016

Location: California, United States

Posted: February 14, 2016 at 12:27 AM / IP Logged

Hey jeremy, I have the same exact kit for my 07 taco, and just finished making all the wire connections. I'm sitting in my truck looking at all this mess as I type. For the most part I have it working, except that I cannot seem to locate the correct vehicle lock motor wire, which the WHITE/ blue wire from the 14 pin harness on the rs 160 is supposed to connect to. In the testing step, instructions say to touch the WHITE/ blue wire to ground 3 times. I've got that working enough to crank the engine, but the immobilizer doesn't seem to be doing its job of faking the presence of a key transponder near the ignition. When I hold my key next to it, it will start though. So here I am as you were hoping to find a post by someone more knowledgeable and successful in their very similar installation. Have you had any luck with yours?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.