the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DBALL2 Newer firmware


Post ReplyPost New Topic
< Prev Topic Next Topic >
jameselantra 
Copper - Posts: 104
Copper spacespace
Joined: November 24, 2015
Location: Ontario, Canada
Posted: February 06, 2016 at 10:34 PM / IP Logged Link to Post Post Reply Quote jameselantra
How does one obtain a newer firmware for DBALL2
My firmware changelog goes up to version 2.25 but I can only figure out how to get 1.09
help please. I have xkloader 2 and would like to know how to get the latest firmware. see change log below
Firmware History of 402.HKHT1 v1.09
v2.25Fix Obd Requestv2.24Led diagnostic (follow the guide)v2.21Fix brake status (on then off) when ignition is turn offv2.17update default featurev2.16Fix No startv2.15Fix 1 no start
fix reset when no can is connected
Add 2008- carv2.14-fixed relock after shutdownv2.13- fixed sense trunk issuev2.11- added sense_rke_trunkv2.10- Added auto-relock after shutdown
- Fixed issue when pairing remote after programming devicev2.08change: added controlled doorlock
change: fixed unlock/relock issue at shutdown
change: added alarm sensingv2.07fixed oem fob control issue
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: February 10, 2016 at 6:23 AM / IP Logged Link to Post Post Reply Quote beegbie
Only Alpha testers can access the latest firmwares. They won't publish them until they are proven to work and all of the bugs are worked out. Trust me, you don't want to test these out on your own car.
jameselantra 
Copper - Posts: 104
Copper spacespace
Joined: November 24, 2015
Location: Ontario, Canada
Posted: February 21, 2016 at 4:37 PM / IP Logged Link to Post Post Reply Quote jameselantra
unfortunately the firmware thast is published is buigy as hell on 3 2015 elantras i know.
I guess its time to put garbage in the garbage and go to a different brand.
The elantras Electrical was revised one year after the published firmware and I can grab any elantra with a dball2 in in and replicate 3 very annoying bugs one of which is very bad for the starter motor.
Just finished proving this at an install shop with 3 cars....

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer