DEI 504C sensor options for replacement

Home / the12volt's Install Bay / Car Security and Convenience / DEI 504C sensor options for replacement

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hybrid gti 2

Member - Posts: 4

Joined: July 19, 2009

Location: California, United States

Posted: February 29, 2016 at 6:54 PM / IP Logged

I have a Clifford Rsx 3.5 with a 504C sensor. I'm not very good with alarm stuff if it's complicated, so bear with me. I want to see if I can replace the sensor with something the will be more sensitive. So I'm looking for a little help. I see it's a 4 wire unit with a blue wire jumpered between 2 points. I know many newer ones seem to be a 3 wire setup. Can someone tell me what I can do, without telling me how stupid I am at this? Since I already know that much :) .

Thank you in advance

02 wrx wag

05 f250 lifted 6" on 35's

Back to Top

hybrid gti 2

Member - Posts: 4

Joined: July 19, 2009

Location: California, United States

Posted: February 29, 2016 at 6:56 PM / IP Logged

This is for my 02 wrx. It's wired for window break sensor and roll down windows. It was professionally done almost 10 years ago. I don't have any other problems with this alarm. So I don't want to replace it just yet.

02 wrx wag

05 f250 lifted 6" on 35's

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.