programming viper 5305v

Home / the12volt's Install Bay / Car Security and Convenience / programming viper 5305v

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jipsdad

Member - Posts: 2

Joined: February 22, 2016

Location: Massachusetts, United States

Posted: March 04, 2016 at 11:39 AM / IP Logged

I have a viper 5305v installed in my 1998 toyota corolla. I do alarm and audio instalations. The problem iam having is with programming I have done it many times before. When i press the valet button the light stays on won't chirp or do anything unless I press it again and it turns off. It does what it has to do when light is steady,disarms alarm. If anyone can help I would appreciate it.

I

Diy-fer

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.