2006 f250 adding keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 2006 f250 adding keyless entry

Welcome Guest :)

Members

< Prev Topic Next Topic >

lweingart

Member - Posts: 4

Joined: March 16, 2016

Location: Florida, United States

Posted: March 16, 2016 at 6:06 PM / IP Logged

I have a 4 door 2006 f250 with out factory keyless entry. I'm trying to install a directed pke system but I'm stumped.

The truck has 5 wire reverse polarity negitve trigger door locks.

I'm pretty sure I found the right diagram for the 2 relays but I need to know what wire is the master switch to cut.

Can anyone help me out?

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: March 16, 2016 at 7:44 PM / IP Logged

MAKE : FORD | MODEL : F250 | YEAR : 2006

Power Lock pink / YELLOW (w/o keyless); 5wire driver kick, door harness

Power Unlock pink/lt. grn (w/o keyless); 5wire driver kick, door harness

If i Can't Install it I Don't need it Joe

lweingart

Member - Posts: 4

Joined: March 16, 2016

Location: Florida, United States

Posted: March 16, 2016 at 7:47 PM / IP Logged

If I cut these wires how do I know which end goes to the switch and what ends goes to the motor?

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 16, 2016 at 8:26 PM / IP Logged

In the download section is a pdf file for door lock systems, df 1041

it has a good explanation of type c locks and wire testing.

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=1041

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

lweingart

Member - Posts: 4

Joined: March 16, 2016

Location: Florida, United States

Posted: March 16, 2016 at 9:20 PM / IP Logged

Ok I cut the wires in the drivers kick panel and temporarily wired them into the relays. Every thing seems to work except that the remote is supposed to unlock the doors but it locks them instead. There's is only one button on the fob and it's a unlock button.

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 16, 2016 at 9:46 PM / IP Logged

Try reversing your setup

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

lweingart

Member - Posts: 4

Joined: March 16, 2016

Location: Florida, United States

Posted: March 16, 2016 at 9:58 PM / IP Logged

The weird thing is that when i walk up to the truck it unlocks and when I walk away it locks just like it should. It's just the fob that is reversed.

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: March 18, 2016 at 12:30 PM / IP Logged

if you press the button on the PKE it will send a lock pulse, if you press and hold the button for abot 3-5 seconds it will send an unlock command.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.