Envoy XL Accessory 2 Wire?

Home / the12volt's Install Bay / Car Security and Convenience / Envoy XL Accessory 2 Wire?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jcp0575

Member - Posts: 8

Joined: July 22, 2010

Location: Pennsylvania, United States

Posted: March 18, 2016 at 10:58 PM / IP Logged

I have a 2006 GMC Envoy XL Denali, using a Compustar FT-7000as Remote Start/ Alarm w/ Blade-AL. On the main harness I have all connections made, but on the vehicle, I still have an accessory #2 that I have not touched yet, but there are no wires left on the CN1 connecter left to hook up to this. Im already using all 8 wires from the Compustar CN1 connector for(2)12v Power/ Ground/ Ign 1 & 2/ Acc #1/ Starter/ + Parking Lights. What would I need to do to power that Acc #2 wire on the vehicle during remote Start?

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: March 19, 2016 at 6:00 AM / IP Logged

You are in luck, as the FT7000-AS makes this somewhat easy by having a (-) 250mA Accessory output all set to go at plug

CN5 Pin 20. You will need a 30/40 Amp SPDT relay with an inline fuse. Here is the wiring :

Relay Pin 85 to CN5-20

Relay Pins 86 and 87 to +12V constant through the fuse with a 25 Amp fuse

Relay Pin 30 to vehicles Brown Accessory2 wire

Soldering is fun!

Back to Top

jcp0575

Member - Posts: 8

Joined: July 22, 2010

Location: Pennsylvania, United States

Posted: March 19, 2016 at 12:50 PM / IP Logged

Thank you, I love this site, I received a lot of help for each install i've done in the past on my trucks. I cant just leave anything I do as just basic, that why I turn to you guys. I try to buy the best and install as many accessories as I can, RPS Touch, EZGO, 2W901R-SS Remote, Battery backup, (2) DEI535T Window Up/ Down, OP500 Programmer, etc. etc... I'm in Pa so hopefully it warms up as I'm dying to get to this. Thanks again for all your help.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.