the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

'10 ram 3500 CTD - Compustar cm7200 / Blade AL


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrblonde747 
Member - Posts: 1
Member spacespace
Joined: July 29, 2016
Location: Alberta, Canada
Posted: July 29, 2016 at 12:20 PM / IP Logged Link to Post Post Reply Quote mrblonde747
Hey fellas,
2010 ram 3500, 6.7 diesel, automatic (CM7200, Blade AL, drone mobile, 901 2 way fob.
- had a Compustar put in truck last year and have an intermittent starting issue. Sometimes it starts, sometimes it doesn't. When it doesn't, he attempts 3 times (seems too short of cranks) then goes into fail mode with ACC on. Coming to a truck in -30c with lights all on, fan blowing, and radio on but truck off not good lol.
I looked at starter under dash and it does not have CN5 installed. This is a 20 pin connector, 1 of them being "AC Tach in" another pin on this connector is "(-) Hood in". So currently truck will start with hood open.
Truck is set for "assumed timed crank" option 2-10 feature 4. This sends a 3 seconds crank signal.
I picked up a 20 pin connector today (gray CN5) this will allow me to add a hood pin and run an actual tach wire.
I think I would only need the 2 wires of the 20. The rest I believe is through canbus.
Anyone see an issue with trying this? I'm not an installer, just learning as I go. I will have to try and change the tach sensing with the 901 fob afterwards.
Appreciate any kind of input I can get guys. Thanks
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 29, 2016 at 1:07 PM / IP Logged Link to Post Post Reply Quote lurch228
Shouldn't be a issue to hook those up I always do. Less problems that way.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer