viper 5706 in 08 mazda 3

am upgrading from the factory KARR alarm to the Viper 5706V, I have added the DEI 522T and three high powered door lock actuators already to the car and did wire the new lock actuators into the existing alarm system. Currently my questions are: If I use a DEI 451M would I have to use any resistors in the wiring, and would I still have the ability to have driver door priority, and still be able to have the trunk release ability(if wired into a different pin location such as 6,7 or 8, all are -200mA aux outputs. For adding the trunk release into the system, which connection should I use? the number 3 pin of the 24 pin connector(-200 mA trunk release output) and have the light be the instant trigger to pin 10 (trunk pin/instant trigger input N/C or N/O)?fionn61