After Installed Parrot MKi9200

Dear friends, I installed Parrot MKi9200 today and I have a problem after the installation. Before when I unlock my car, all the inside and the parking light switch On and after my installation, the inside work when i unlock but the parking doesn't work when i unlock. So please what can be the problem? I took out the Parrot MKi9200 and see if it will work but still not work. And the Parrot works fine. But I think I didn't hook the Accessory wire in good place because now when I open my car doors then Parrot switch on for sometime then it go off without touching the ignition. My car is BMW X1 year 2010 and is push start.Peace and Love

The ACC and 12V+ can be supplied by the CAS module which takes the digital signal from the push button and feeds out analogue voltages. Purple primary colourfor ACC, red primary for 12V+ constant, plain brown for earth (masse). Now check all your fuses because you've messed up somewhere.

well thanks a lot. i am really happy for your replied. but i just back from work and i didn't do nothing on my car and now the light work fine.but the only thing i have to do is the colour code you gave to me. the rest of the wire are ok but the only thing i have to change is the purple wire.Peace and Love