2004 Dodge Ram 2500 5.7l Hemi remote start instl

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Dodge Ram 2500 5.7l Hemi remote start instl

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stormyj

Member - Posts: 12

Joined: December 27, 2016

Location: Indiana, United States

Posted: December 27, 2016 at 4:38 PM / IP Logged

Hi all,

Attempting an install on above vehicle. excel file has connections from the autopage rs-730a and the vehicle and where I think they should go. There will be some diodes on door switches and a few resistors I believe. If any pros can take a look and see if there is anything I missed or something i need to add, I would greatly appreciate it. I will be checking voltage as I go.

thanks

Jim

Excel file

http://www.filehosting.org/file/details/629157/ram2500connections.xlsx

Thanks

Back to Top

stormyj

Member - Posts: 12

Joined: December 27, 2016

Location: Indiana, United States

Posted: December 27, 2016 at 4:45 PM / IP Logged

Also for the door locks.

Door locks are a 1-wire system, the lock requires a Neg thru a 820 ohm resistor and unlock requres a Neg thru a 330 ohm resistor. Some units might need 2 ea 775 relays

Thanks

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 28, 2016 at 8:47 PM / IP Logged

Get a Direct 451M door lock module. They cost $9 and include an assortment of resistors. Makes life easy.

Could you post the Excel file? I don't mind looking it over but really don't want to give them my email address...

Soldering is fun!

Back to Top

stormyj

Member - Posts: 12

Joined: December 27, 2016

Location: Indiana, United States

Posted: December 31, 2016 at 11:55 AM / IP Logged

I dont think I can upload a file. Not a silver or gold member.

Thanks

Back to Top

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 31, 2016 at 12:56 PM / IP Logged

Cut and past might work. Even manually typing it in, if you would like the Forum members to review it.

Soldering is fun!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.