2010 ford fusion manual transmission, RS

Home / the12volt's Install Bay / Car Security and Convenience / 2010 ford fusion manual transmission, RS

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

darmck

Member - Posts: 12

Joined: September 11, 2016

Location: Alberta, Canada

Posted: January 10, 2017 at 8:00 PM / IP Logged

1) A while back I installed a Titan TS-133 in a 2010 ford fusion manual transmission. I couldnt program a Fortin EVO-ALL at the time so I used a lower model bypass. However this gave the issue of the radio staying on after turning the vehicle off putting it into ready mode. How would I go about wiring in to shutdown the RAP in this situation? The EVO-ALL's have specific hookups for the RAP but the model I used is just purely a bypass.

2) Looking at a prostart system ( CT-4311TW for instance ) the AUX 1 output lists an option of negative accessory output, when would this be used?

I'm just trying to increase my knowledge and understanding so I can have an easier time installing in the future. Thanks in advance for the help, advice and patience.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.