2007 ford super duty remote start, door locks

Home / the12volt's Install Bay / Car Security and Convenience / 2007 ford super duty remote start, door locks

Welcome Guest :)

Members

< Prev Topic Next Topic >

jeffshelton1

Member - Posts: 3

Joined: January 21, 2017

Location: Indiana, United States

Posted: January 22, 2017 at 2:45 PM / IP Logged

Can someone help me with wire colors with for 2007 f-250 super duty? I have found charts but they don't match. Looking for Power lock/unlock.I am installing MPC remote start with fortin bypass.

buster

jeffshelton1

Member - Posts: 3

Joined: January 21, 2017

Location: Indiana, United States

Posted: January 22, 2017 at 2:55 PM / IP Logged

Hi, I am installing a crime stopper rs3-g5 with a fortin key over ride all on my 2007 f 250 super duty. was told it will work before i installed bypass but it did not.Need help.

buster

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 22, 2017 at 4:04 PM / IP Logged

Did you find that the truck has transponder chipped keys? I'm assuming that it did because it had the transponder 4 Pin connector at the ignition switch. Did the Key-Override-All install and program as per the directions? You will need 2 working, unique keys to do the programming.

You can test your installation of the RS3-G5 by unplugging the 4 Pin connector of the Key-Override-All, inserting ( but not turned ) an ignition key and trying a R/S.

Soldering is fun!

jeffshelton1

Member - Posts: 3

Joined: January 21, 2017

Location: Indiana, United States

Posted: January 22, 2017 at 5:40 PM / IP Logged

I have not finished install. Hard time finding power lock/unlock colors. Got chart from pushcart for 2008.Looks like it's the one I can use. The only 4 pin with matching colors was on the left side of the steering wheel but it didn't plug in to the ignition barrel. Fortin connection #2 shows grey 6 pin at my ignition. Don't have one or understand where to go from here. I read to try remote before i installed bypass but it didn't work.

buster

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 22, 2017 at 7:15 PM / IP Logged

Here is some info from Bulldog Security for your Truck :

http://diagrams.marktoonen.nl/printlist.aspx?MakeID=18&ModelID=19851

Probably best to have a game plan. Start by collecting all available info on your truck,

downloading wire guide lists, bypass module install guides and the full install instructions

for your R/S system. Next compare the guides for differences and compile a chart with all

the necessary connections. Post that list for member review. Next, bench prep the R/S

to the bypass module. Then start taking the truck apart to locate, test and verify all

wires. You are undertaking a complex job and careful planning is required so that you

don't kill the truck or R/S system.

Soldering is fun!

bogucki

Copper - Posts: 91

Joined: July 11, 2016

Location: Alberta, Canada

Posted: January 23, 2017 at 12:29 AM / IP Logged

here are some pics for you that i have

2007 ford super duty remote start, door locks -- posted image.

boguckialex

bogucki

Copper - Posts: 91

Joined: July 11, 2016

Location: Alberta, Canada

Posted: January 23, 2017 at 12:31 AM / IP Logged

boguckialex

bogucki

Copper - Posts: 91

Joined: July 11, 2016

Location: Alberta, Canada

Posted: January 23, 2017 at 12:36 AM / IP Logged

at the brake pedal switch

boguckialex

bogucki

Copper - Posts: 91

Joined: July 11, 2016

Location: Alberta, Canada

Posted: January 23, 2017 at 12:43 AM / IP Logged

you will need to use relays to power up the 2nd and 3rd acc wires too, for the bypass your truck uses a 4 pin! connector at the ign switch not a 6 pin!,

boguckialex

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.