Magnetic Sensor?

Home / the12volt's Install Bay / Car Security and Convenience / Magnetic Sensor?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

maverick616

Member - Posts: 5

Joined: April 03, 2017

Location: Washington, United States

Posted: April 03, 2017 at 8:52 PM / IP Logged

I'm currently in the process of installing an Avital 3100L security system to my Isuzu box truck. My main concern is to have a magnetic sensor on the rear roll up door. Is there a way to have this wired so the alarm activates if the wire to the sensor is cut?

The installers in my area tell me they can conceal the wire but I thought I would see if there was a better way to install this.

Thanks in advance for any help.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 03, 2017 at 10:05 PM / IP Logged

Piece of cake. Going to take me a minute to find it.

Use the positive trigger wire of the alarm. You will need a normally open switch. This means that when it is by the magnet it will be closed. Ground the other leg of the switch. At the alarm brain you want to connect a 1k ohm resistor from Constant 12 volts to the positive trigger wire of the alarm.

When magnet is near switch voltage on positive trigger wire will be 0 When magnet is moved away or if wire is cut voltage goes to 12v and alarm will be triggered.

Back to Top

maverick616

Member - Posts: 5

Joined: April 03, 2017

Location: Washington, United States

Posted: April 05, 2017 at 6:46 PM / IP Logged

Excellent, I will try this out and reply with results.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.