4Runner excalibur/omega factory alarm problem

Home / the12volt's Install Bay / Car Security and Convenience / 4Runner excalibur/omega factory alarm problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

1985sr5

Member - Posts: 2

Joined: September 05, 2017

Location: Wisconsin, United States

Posted: September 05, 2017 at 2:03 AM / IP Logged

I have just installed a excalibur AL-1870-3DB with an omega blade-al in a 2013 toyota 4runner sr5 with the standard 80bit (G) key (Not the push to start). My question is does anyone know why if my alarm is armed and i remote start or lock the car again the factory alarm goes off? If i unlock first than remote start it works just fine.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 05, 2017 at 4:50 AM / IP Logged

Can you program an equivalent to the DEI safe start where it unlocks the doors prior to r/start, also have you connected key sense?

Back to Top

1985sr5

Member - Posts: 2

Joined: September 05, 2017

Location: Wisconsin, United States

Posted: September 06, 2017 at 9:19 PM / IP Logged

Yes all works good now i programged it to unlock first start the vehicle than do a lock. Thanks dont know why i didnt think of that.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.