2016 Mazda CX-5 Viper 5906v

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Mazda CX-5 Viper 5906v

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lightningwind

Member - Posts: 2

Joined: September 18, 2017

Location: Pennsylvania, United States

Posted: September 19, 2017 at 11:36 PM / IP Logged

hi all this is my first post on the forum, since i heard lots good thing about this site, so i came to search for help. i have a 2016 mazda cx-5 GT w/tech package, now i wanna install the viper 5906v on the car, but i can't find any wire diagram anywhere, not even on this site, so i wanna see if anybody can provide that, and anybody here have installed the viper 5906v on their car? it is a good alarm/remote start like they said it is? thank you so much for all the help

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 20, 2017 at 12:50 PM / IP Logged

https://directechs.blob.core.windows.net/ddt/403-MA3-2.20-ORI_2016-CX-5-(Smart-Key)_IG_EN_20170619.pdf

You'll need a DB3 flashed to your vehicle.

Having said that, if this is your first time I strongly recommend you taking it to a pro.

Back to Top

lightningwind

Member - Posts: 2

Joined: September 18, 2017

Location: Pennsylvania, United States

Posted: September 20, 2017 at 10:01 PM / IP Logged

thank you so much for your help, but i saw on the manual it says there is no vehicle takeover, but that's the reason i wanna go aftermarket instead of the mazda factory remote starter, don't wanna start the car again after it's already started. but thank you for your help again.

Back to Top

abethebue

Member - Posts: 26

Joined: July 22, 2010

Location: California, United States

Posted: September 20, 2017 at 11:28 PM / IP Logged

Bypass the door trigger when you remote star so the car doesn't shut off when you open the door

abethebue

Back to Top

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: September 21, 2017 at 6:35 PM / IP Logged

The ads-alca firmware has safe take over. Check it out at www.idatalink.com.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.