2016 Ram Starter Kill Anti Grind

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Ram Starter Kill Anti Grind

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

devonow

Member - Posts: 5

Joined: December 30, 2017

Location: California, United States

Posted: January 02, 2018 at 10:20 PM / IP Logged

Ok so I have installed a Fortin EvoAll remote start and it works great. Now I want to enable the alarm feature since me truck does not have an oem security system. I want to wire in a starter kill/ anti grind relay but am a little unsure where to tie it in. During my remote start install, I removed the ignition plug from the tip key barrel and integrated it in to the fortin T harness. Im assuming that I splice the relay in the ignition plug before the t harness? The Ram 1500 oem ignition plug has 4 wires. Red (12V) White (Data) Violet (Starter Mux) and Black (ground). So would it be correct to use the 12V as my ignition constant and to cut the Violet starter mux wire? I want to verify that the starter mux wire is the right one to cut and split between 30 and 87a on the relay.

Thanks!

Chris

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.