Astroflex Remote, '90 Cutlass Cruiser Wagon

Home / the12volt's Install Bay / Car Security and Convenience / Astroflex Remote, '90 Cutlass Cruiser Wagon

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mike86teich

Member - Posts: 3

Joined: February 22, 2018

Location: Alberta, Canada

Posted: February 22, 2018 at 4:36 PM / IP Logged

My car has the

brain box 392-127-301

Astroflex Remote, '90 Cutlass Cruiser Wagon -- posted image.

remote FOB FCC ID: J5F-TX2000

Ive tried every method of programming and the box doesnt respond to anything. So im thinking i must have the wrong remote!?

Could anyone steer me in the right direction to finding the correct remote?

Any help is much appreciated, TIA!!

Back to Top

mike86teich

Member - Posts: 3

Joined: February 22, 2018

Location: Alberta, Canada

Posted: February 22, 2018 at 4:37 PM / IP Logged

Car is a 1990 Oldsmobile Cutlass Cruiser Wagon Auto with 3.3L Engine.

Back to Top

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 26, 2018 at 11:50 PM / IP Logged

What methods have you tried to program the remotes?, what color is the led if it’s blue and not green getting a replacement might be hard, what does the receiver have on it Xr or nr? Does the remote have 3 2016 batteries?

The sure fire way to program the remote is to flip the 8 dip switch up to on and activate the brake pedal with vehicle off. Note all other dip switches should be in off position. Once it is pressed and released push any button on the remote if the led on the brain flashes it programmed if you have more than on remote all must be programmed at this time, after all remotes are programmed. Move dip switch back to off and apply brake again to close it out of program mode, if the recievier and antenna wire are good this should work.

Back to Top

mike86teich

Member - Posts: 3

Joined: February 22, 2018

Location: Alberta, Canada

Posted: March 13, 2018 at 1:22 AM / IP Logged

Ive tried the method of cycling the key on and off as well as the method using the dip switch. It does have the three batteries in the remote and the led on the remote is green.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.