Convert Latched Output to Triple Pulse?

Home / the12volt's Install Bay / Car Security and Convenience / Convert Latched Output to Triple Pulse?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xxrzdxx

Member - Posts: 17

Joined: March 15, 2008

Posted: April 04, 2018 at 11:02 AM / IP Logged

Is there a unit or a way to wire a relay(s) to convert a latched output into a multiple pulse output. For example to simulate multiple presses on a seat heater switch.

Back to Top

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: April 04, 2018 at 2:44 PM / IP Logged

Probably with an LM556 timer. Is the trigger positive or negative. Are the output pulses needing to pull the switched terminal of your seat heater switch to a positive voltage or to ground?

Back to Top

xxrzdxx

Member - Posts: 17

Joined: March 15, 2008

Posted: April 04, 2018 at 3:06 PM / IP Logged

Each negative pulse cycles through the heat settings

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.