Viper 5706V/EVO-ALL Issue

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5706V/EVO-ALL Issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spadz93

Member - Posts: 41

Joined: June 04, 2015

Location: New Jersey, United States

Posted: November 05, 2018 at 10:42 AM / IP Logged

All of a sudden, my remote start stopped working. Ignition would come on, but no cranking. Car would crank when i held a key close to the cylinder, but die 3seconds later. Did a little digging and according to Fortin's documentation, the viper isn't giving the evo-all a GWR signal. This happens either over data or hardwired to the status output on the viper. Is my viper unit toast? Programming the evo-all went smoothly, so that's all fine. Seems odd that it would just quit like this after working for over a year.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 05, 2018 at 12:22 PM / IP Logged

If in W2W mode, you could test the Viper (-)Status to see if it is working. As a possible work-around, you could try using the Vipers Second Status output wire. Just ensure it isn't programmed to Defrost.

Soldering is fun!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.