the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Silverado Bypass Module


Post ReplyPost New Topic
< Prev Topic Next Topic >
white190 
Member - Posts: 2
Member spacespace
Joined: May 14, 2006
Location: United States
Posted: November 17, 2018 at 6:55 PM / IP Logged Link to Post Post Reply Quote white190
I currently have a GMDLBP module wired in and all works correctly. When ignition is shut off, 10 or 15 seconds later, the module locks the doors and also triggers the retained accessory power to shut off. I don't want this to happen. I have tested without the alarm/remote start plugged in, so the bypass is definitely triggering the locks. Is this just a "feature" of the GMDLBP? Is there another bypass module that anyone has used that doesn't do this?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: November 21, 2018 at 12:49 AM / IP Logged Link to Post Post Reply Quote lurch228
Programming Option Mode
Tech Notes
Tech Tips
1-Press and hold the Programming button for 2 seconds. The LED will flash for approximately 3 seconds, PAUSE,
then flash once more to indicate entry into MODE1 (DOORLOCK SELECTION).
2-To advance to next MODE, press the Programming button again. The LED will flash to confirm what MODE you
are in. Ex: 1 flash = MODE 1, 2 flashes = MODE 2, and so on...
3-Once you have entered the required MODE: you may then change your options. Advance the OPTION by
pressing the LOCK or UNLOCK button from your aftermarket transmitter.
4-The vehicle will chirp once (1X) or twice (2X) to indicate option level.
5-To exit the OPTION PROGRAMMING: Press and hold the program button until the LED flashes once (1X).
6-To return or change another OPTION, go to step 1.
OPTION PROGRAMMING CHART
Mode Selection Option Programming *Default Value
Mode1:Doorlock output *Option 1: 1st PULSE: Driver Priority Function
2nd PULSE: Unlock all doors
Option 2: 1st PULSE: Unlock all doors
Complete GMDLBP.pdf here: https://dalhems.com/f/d/30faa7a0c62a479b90059f9d00efb91c/1646_GMDLBP_H02_S05_D01_I_EN.pdf
white190 
Member - Posts: 2
Member spacespace
Joined: May 14, 2006
Location: United States
Posted: December 01, 2018 at 9:54 PM / IP Logged Link to Post Post Reply Quote white190
I have the module all programmed and working. My issue is that even not using remote start, not long after the truck is turned off, the bypass module is commanding the doors to be locked and shuts off retained accessory power. It does so without the alarm connected, so it's definitely the bypass. Without the bypass, after shutting off the truck, the doors stay unlocked and my retained accessory power stays on for I believe 10 mins. It seems that this is how this specific bypass works and I'm wondering if there is one that behaves just like stock.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer