Avital 5305l Install, 2010 Lincoln MKZ

Home / the12volt's Install Bay / Car Security and Convenience / Avital 5305l Install, 2010 Lincoln MKZ

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

andyvillen

Member - Posts: 4

Joined: December 23, 2018

Location: Ontario, Canada

Posted: December 23, 2018 at 11:52 PM / IP Logged

Hey all,

I installed a avital 5305l on my 10 lincoln MKZ along with a fortin key-bypass-sl2.

The car will not crank on remote. But if I power the starter wire when it should be cranking it starts and runs.

Is there something I'm missing?

I followed the pictorial on here, the remote has a security but I didnt hook any of that up. Does the remote need to see something from that to start?

Thanks Andy

Back to Top

chev104275

Gold - Posts: 1,424

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 24, 2018 at 6:21 AM / IP Logged

Can you list out what you did connect ? So we can get a better idea of what's going on.

If i Can't Install it I Don't need it Joe

Back to Top

andyvillen

Member - Posts: 4

Joined: December 23, 2018

Location: Ontario, Canada

Posted: December 24, 2018 at 7:53 AM / IP Logged

For sure,

Main 5 pin harness chassis ground, fused 12v constant, parking light output.

Remote 10 pin harness fused 12v ignition 1 relay input, starter output , accessory output, ignition 1 input/ output.

24 pin harness

Trunk release output, hood pin input, horn honk output( does not honk horn ), brake shutdown input.

Thanks in advance :)

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 24, 2018 at 8:21 AM / IP Logged

It looks like you didn't connect the power wire (red/black) for the starter. I always connect all three red fused wires in the remote start harness.

My ex once told me I have a perfect face for radio.

Back to Top

andyvillen

Member - Posts: 4

Joined: December 23, 2018

Location: Ontario, Canada

Posted: December 24, 2018 at 9:04 AM / IP Logged

do you put the red/black with the violet ?

OOOOOHHHH, i understand now... haha... CLICK!

Back to Top

andyvillen

Member - Posts: 4

Joined: December 23, 2018

Location: Ontario, Canada

Posted: December 24, 2018 at 9:17 AM / IP Logged

That was my problem ! thanks for the help!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.