the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar EZGO Proximity Lock/Unlock Doesn’t Work


Post ReplyPost New Topic
< Prev Topic Next Topic >
typerguy 
Member - Posts: 1
Member spacespace
Joined: October 23, 2002
Posted: January 12, 2019 at 1:07 AM / IP Logged Link to Post Post Reply Quote typerguy
1992 Toyota MR2 manual, with Compustar FT-7000AS CONT MAX IT & Pro T12 remote kit.
Alarm and remote start fully functions, no issues at all. However I cannot get the EZGO to perform the proximity unlock/disarm & lock/arm function.
This is what I did.
- Set Option 1-14 setting to 4 using OP500
- Connect Blue 6 pin connector from EZGO antenna cable to control module
- Grounded ground wire from EZGO cable
- Programmed EZ100-R remote. I can arm/lock & disarm/unlock system using button in back of remote
- Enable proximity lock/unlock feature successfully (light flash once) by holding remote button for 8 seconds.
Doesn’t matter what distance I try the EZGO antenna would not recognized the EZ100-R remote.
No sure what else I am missing.
I notice in the master installation guide, EZGO was mention under CN5 Pin 12 Brown/White (Key Sense INPUT).   Is this wire required for proximity lock/unlock?
thanks.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer