Directed Starters, ie 4661, Can You Cycle Through Program Modes?

Home / the12volt's Install Bay / Car Security and Convenience / Directed Starters, ie 4661, Can You Cycle Through Program Modes?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nonsub

Member - Posts: 3

Joined: February 06, 2019

Location: Manitoba, Canada

Posted: February 07, 2019 at 1:14 PM / IP Logged

Hi. Is there a way to cycle though (in this case 4) programming modes or do you have to program the mode, exit programming and re-enter programming again?

Thanks!

Back to Top

nonsub

Member - Posts: 3

Joined: February 06, 2019

Location: Manitoba, Canada

Posted: February 10, 2019 at 12:11 AM / IP Logged

Ahh yes you can. Just hold down brake pedal and choose the desired mode, all modes can be done, multiple times if a mistake was made.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.